Guide
What Is the Micro-Purchase Threshold?
The current dollar limits in FAR 2.101, how a micro-purchase is made, the rules that still apply, and how it relates to the simplified acquisition threshold.
Quick answer
What is the micro-purchase threshold?
The micro-purchase threshold is $15,000 under FAR 2.101. It is $2,000 for construction under the Wage Rate Requirements and $2,500 for services under the Service Contract Labor Standards, and rises to $25,000 inside the United States for purchases supporting contingency operations or disaster response. A micro-purchase can be made without competitive quotations when the price is reasonable, and the purchase card is the preferred way to pay.
Updated November 2026 by the HTSA Federal procurement team.
What are the micro-purchase thresholds?
FAR 2.101 sets one general figure and several exceptions. The amount that applies depends on what is being bought and why.
| Purchase | Micro-purchase threshold |
|---|---|
| Most supplies and services | Micro-purchase threshold $15,000 |
| Construction subject to the Wage Rate Requirements (40 U.S.C. chapter 31, subchapter IV) | Micro-purchase threshold $2,000 |
| Services subject to the Service Contract Labor Standards (41 U.S.C. chapter 67) | Micro-purchase threshold $2,500 |
| Contingency operations, attack recovery, international disaster assistance or a major disaster, inside the United States | Micro-purchase threshold $25,000 |
| The same purposes, outside the United States | Micro-purchase threshold $40,000 |
| Supplies or services from institutions of higher education or nonprofit research organizations | Micro-purchase threshold $15,000 or higher |
The higher contingency figures apply only when the agency head determines the purchase supports one of those purposes, and FAR 13.201(g)(2) requires a clear and direct relationship to it. For higher education and nonprofit research suppliers, the agency head can set a higher figure based on clean single-audit findings, an internal risk assessment or state law.
How does it compare with the simplified acquisition threshold?
The two thresholds mark different steps. Above the micro-purchase threshold, simplified acquisition procedures apply up to the simplified acquisition threshold.
| Threshold | Amount | What it means |
|---|---|---|
| Micro-purchase threshold | Amount $15,000 | What it means No competitive quotations needed if the price is reasonable (FAR 13.203); the purchase card is the preferred way to buy and pay (FAR 13.201(b)). |
| Simplified acquisition threshold | Amount $350,000 | What it means FAR Part 13 simplified procedures cover acquisitions up to this amount (FAR 13.000). |
| Contingency or disaster support | Amount $1,000,000 | What it means Simplified acquisition threshold inside the United States for these purposes; $2 million outside (FAR 2.101). |
| Commercial products and services | Amount $9,000,000 | What it means Subpart 13.5 extends simplified procedures above $350,000 for commercial items; $15 million for acquisitions described in 13.500(c). |
How does a micro-purchase work?
Micro-purchases are made by contracting officers and individuals appointed under FAR 1.603-3, and FAR 13.201(a) encourages agency heads to delegate that authority. Any purchasing method in FAR Subpart 13.3 can be used at or below the threshold, as long as the purchaser is authorized and trained under agency procedures.
FAR 13.203 lets a micro-purchase be awarded without soliciting competitive quotations when the buyer considers the price reasonable. Purchases should be spread among qualified suppliers where practicable, and the price only needs checking when the buyer suspects it is unreasonable or has no comparable pricing to go on.
What rules still apply to a micro-purchase?
FAR 13.201(d) says micro-purchases do not require provisions or clauses, except those at 13.202 and 32.1110. Under 13.202, clause 52.232-39, Unenforceability of Unauthorized Obligations, applies automatically to every micro-purchase, including card purchases. It protects the government from indemnification terms in license agreements and terms of service.
Other requirements stay in force. FAR 13.201(e) and (f) keep the Part 8 required sources and the Subpart 23.1 requirements, and paragraphs (i) and (j) keep the bans on Kaspersky Lab products and on covered telecommunications equipment. Under 13.201(h), a card payment at or below the threshold is exempt from the SAM check for delinquent federal debt.
Can a purchase be split to stay under $15,000?
No. FAR 13.003(c)(2) forbids breaking a requirement that adds up to more than the micro-purchase threshold into several smaller purchases just to stay under it, or to avoid any requirement that applies above it. The same rule applies to the simplified acquisition threshold.
Why does the micro-purchase threshold change?
FAR 1.109 carries out 41 U.S.C. 1908, which has the FAR Council adjust statutory acquisition thresholds for inflation every five years, starting in October 2005, using the Consumer Price Index for All Urban Consumers. The Wage Rate Requirements, Service Contract Labor Standards and Trade Agreements Act thresholds are not escalated, which is why the $2,000 and $2,500 figures stay low.
Can you pay HTSA Federal with a purchase card?
Yes. HTSA Federal accepts the Government Purchase Card for supply orders. Send the NSN or part number and quantity for a quote, then place the order on the card within your own card limits; how to buy covers the steps.
FAQ
Micro-purchase questions
What is the micro-purchase threshold in 2026?
It is $15,000 for most supplies and services. That is the figure in the FAR 2.101 definition effective March 13, 2026, which we checked on acquisition.gov in November 2026. Construction under the Wage Rate Requirements stays at $2,000 and services under the Service Contract Labor Standards at $2,500, because those thresholds are not adjusted for inflation.
Do micro-purchases need competitive quotes?
No. FAR 13.203(a)(2) lets a micro-purchase be awarded without soliciting competitive quotations when the contracting officer or appointed purchaser considers the price reasonable. FAR 13.203(a)(1) still asks buyers to spread micro-purchases equitably among qualified suppliers where practicable, so the same vendor should not get every order by default.
Can I split an order to keep it under the threshold?
No. FAR 13.003(c)(2) prohibits breaking down a requirement that totals more than the micro-purchase threshold into several purchases below it, either to use simplified procedures or to avoid a requirement that applies above the threshold. Buy the whole requirement under the procedure its total value calls for.
Who can make a micro-purchase?
Contracting officers and individuals appointed under FAR 1.603-3, which covers purchase cardholders and others with delegated micro-purchase authority. FAR 13.201(a) encourages agency heads to delegate it, and 13.201(c) requires the purchaser to be authorized and trained under agency procedures for the purchasing method used.
Is the purchase card required for micro-purchases?
It is the preferred method, not the only one. FAR 13.201(b) makes the Governmentwide commercial purchase card the preferred way to buy and pay for micro-purchases, and 13.201(c) allows any method in Subpart 13.3. FAR 13.301(b) also tells agencies not to limit the card to micro-purchases.
How often is the threshold adjusted for inflation?
Every five years. FAR 1.109 says 41 U.S.C. 1908 requires the FAR Council to adjust statutory acquisition-related thresholds for inflation on a five-year cycle that began in October 2005, using the Consumer Price Index for All Urban Consumers. Thresholds set under the Trade Agreements Act are excluded.
Sources
We checked the rules and figures on this page against these official sources in November 2026. Thresholds and clauses change, so confirm them with your contracting office before you buy.
- FAR 2.101 Definitions (micro-purchase and simplified acquisition thresholds)
- FAR 1.109 Statutory acquisition-related dollar thresholds, adjustment for inflation
- FAR 13.000 Scope of part
- FAR 13.003 Policy (splitting requirements)
- FAR 13.201 General (micro-purchases)
- FAR 13.202 Unenforceability of unauthorized obligations in micro-purchases
- FAR 13.203 Purchase guidelines
- FAR 13.301 Governmentwide commercial purchase card
Buying with a purchase card?
Send the NSN or part numbers and quantities for a written quote, then pay on the card within your limits.
Related pages
- How to BuyWhat to send for a quote, paying by Government Purchase Card or Net-30, and WAWF invoicing on DoD orders.
- WAWF InvoicingHow DoD vendors invoice in Wide Area WorkFlow under DFARS 252.232-7003: PIEE access, document types, routing codes and exceptions.
- TAA ComplianceWhat TAA compliant means, the designated countries, the $174,000 WTO GPA threshold, exceptions and clauses 52.225-5 and 252.225-7021.